Sonoline C Fetal DopplerFDA approvedPackage Includes:
*Sonoline C doppler body
*60Gram ultrasound gel tube ( good for over 50 tests )
*2 AA strarting batteries
*1 year warranty
The 3 MHz is an early term and general purpose Doppler probe. It will work very well through most full term pregnancies. The 2 MHz probe was designed to accommodate late term and obese pregnancies since it works best at 10 cm and larger depths
The device uses color LCD of high resolution to display the fetal heartbeat waveform, and figure out
the FHR to help the doctor diagnose in time.
It contains components of ultrasonic signal transmitter and receiver, analog signals processing unit, FHR
calculating unit, LCD display control unit etc. It has 3 work modes: real-time FHR display mode, averaged FHR display mode, and manual mode. It also has audio output, and can
be connected with earphone or recorder with audio input.
² Beautiful shape, portable, easy operation
² The probe has bending structure which is easy to operate and can increase the ease
of the pregnant women, embodies the humane care design.
² Fetal heart rate values, bar graph and heartbeat waveform color screen display.
² Alarming in red when the fetal heart rate range is out of the normal range.
² Battery status indicator.
² Built-in speaker.
² Output for headphone.
² Auto shut off.
Two pieces of standard 1.5V alkaline battery available which can work no less than 8 hours.
Safety: Complies with: IEC 60601-1:1988＋A1:1991＋A2:1995
* Anti-electroshock Type: Internally powered equipment.
* Anti-electroshock Degree: Type B applied part
* Harmful Liquid Proof Degree:
* Main unit :Ordinary equipment (sealed equipment without liquid proof).
* Probe: Prevent from water splashing, degree of protection: IPX4.
*Degree of Safety in Presence of Flammable Gases: Equipment not suitable for use in
* presence of flammable gases.
* Working System: Continuous running equipment.
* EMC: Group I Class B.
* Suitable Using Range: Suitable for use after the 12th week of pregnancy.Physical Characteristic
* Size: 135mm (Length) *92mm (Width) *29 (Height) mm
* Weight: About 245g (including batteries)Working Environment
* Temperature: +5℃ - +40℃
* Humidity: <=80％
* Atmospheric Pressure: 70 kPa - l06kPa Transport and Storage:
* Temperature: -10℃ - +55℃
* Humidity: <=93％
* Atmospheric Pressure: 50 kPa-l06kPa Display: 45mm * 25mm LCD display
* FHR Measuring Range: 50-240BPM (BPM: beat per minute)
* Resolution: 1BPM
* Accuracy: (+/-)2BPM
* Power consumption:<0.8W
* Auto Shut-OFF: After 1 minute no signal, power off automatically.
* Battery Type Recommended: Two pieces of 1.5 V DC battery (SIZE AA LR6).Probe:
* P-: <0.5MPa
* Iob: <10 mW/cm2
* Ispta: <50mW/cm2
* Ultrasonic Output Intensity: Isata<5 mW/cm2
* Ultrasonic Output Power: P < 10 mW
* Working Mode: Continuous wave Doppler
* Effective Radiating Area of Transducer: 157mm2 (+/-)15%